點擊圖片查看大圖| PC 5240T-ET03 | ||||
| Technical Data | ||||
| Property | Test Condition | Unit | Standard | Value |
| Physical Properties | ||||
| Specific Gravity | - | g/cm3 | ASTM D 792 | 1.19 |
| Water Absorption | 24hr，23℃，50%rh | % | ASTM D 570 | 0.17 |
| Mold Shrinkage | % | ASTM D 955 | 0.4 to0.7 | |
| Melt Flow Index | 300℃/1.2kg | g/10min | ASTM D 1238 | 35 |
| Mechanical Properties | ||||
| Tensile Strength | 1.5mm/min | Mpa | ASTM D 638 | 68 |
| Elongation at Break | 1.5mm/min | % | ASTM D 638 | 190 |
| Flexural Strength | 1.3mm/min,50mm span | Mpa | ASTM D 790 | 82 |
| Flexural Modulus | 1.3mm/min,50mm span | Mpa | ASTM D 790 | 1900 |
| Izod Notched Impact Strenth | 1/8in(3.2mm),Izod，23℃ | J/m | ASTM D 256 | 760 |
| hermal Properties | ||||
| temperature of deflection under load | 264psi(1.8Mpa),3.2mm | ℃ | ASTM D 648 | 125 |
| Glass transition temperature | 10℃/min | ℃ | ASTM D 648 | 144 |
| vicat softening temperature | 50N;50℃/h | ℃ | ASTM D 648 | 143 |
| Burning behavior UL94(UL recognition) | 3.2mm | Class | UL-94 | HB |
| Other Propeties | ||||
| Transmissivity | 3mm | % | ASTM D 1003 | 83 |
| Reflectance | 3mm | % | ASTM D 1003 | - |
| Haze | 6mm | % | ASTM D 1003 | 98 |
| These property characteristics are taken fron the TEVOE plastics data bank and are base on the international catalogue | ||||
| of basic data for plastics according to ASTM. | ||||
超薄注塑PC 5240T-ET03
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們原則上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請?jiān)敿?xì)核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換